Earthquake record › Oregon

Oregon in the Sealed USGS Record

40 events whose USGS place string ends in Oregon, across 26 of our daily seals. Counts are of what we sealed, not of what occurred.

What this archive is, exactly. The USGS all_day feed holds the last 24 hours and is overwritten in place. We seal one dated copy of it per day. An event that appeared in the feed and was superseded between two of our seals is not in this archive at all. These pages are a record of what USGS asserted at each seal — they are not a complete catalogue of earthquakes, and nothing here should be read as one.

Review status as sealed: reviewed 40. An automatic value is a machine solution USGS may still revise; a reviewed value has had a human look at it. Which one you are reading matters more than the magnitude itself.

By magnitude

MagnitudeEvents
Below M1.07
M1.0 – M1.920
M2.0 – M2.95
M3.0 – M3.94
M4.0 – M4.93
M5.0 and above1
No magnitude published0

6 of 40 events in Oregon were sealed at or above M3.5 — the magnitude Texas Railroad Commission seismic-response conditions are written around. That is a count of what the feed said, not a determination about any permit, operator or well.

Get told when the record changes for Oregon

USGS publishes the last day and overwrites it, then revises events in place — automatic becomes reviewed, magnitudes move, and the old value stops existing everywhere. We seal a dated copy every day. Leave your email and we'll tell you when an event in Oregon is revised after the fact, with what it said before.

Email me revisions for Oregon →

Work email only. No newsletter, no obligation.

Prefer to just buy it? See the custom, source-cited close file, priced, with a sample deliverable.

Narrower views

Present but below our page threshold, so named here instead of given a page: Below M1.0 (7), M2.0 – M2.9 (5), M3.0 – M3.9 (4), M4.0 – M4.9 (3), M5.0 and above (1).

Largest events on record here

MagnitudePlace, as publishedReview statusSeal
M5.50218 km W of Bandon, Oregonreviewed2026-06-29
M4.90128 km WSW of Port Orford, Oregonreviewed2026-08-06
M4.60214 km W of Bandon, Oregonreviewed2026-07-22
M4.20150 km WNW of Port Orford, Oregonreviewed2026-07-24
M3.90210 km W of Langlois, Oregonreviewed2026-06-29
M3.80236 km W of Bandon, Oregonreviewed2026-07-13
M3.00215 km W of Bandon, Oregonreviewed2026-07-22
M3.00189 km W of Bandon, Oregonreviewed2026-07-22
M2.90101 km WSW of Port Orford, Oregonreviewed2026-08-08
M2.80171 km WSW of Port Orford, Oregonreviewed2026-07-19
M2.613 km SE of Rose Lodge, Oregonreviewed2026-07-11
M2.2458 km W of Oceanside, Oregonreviewed2026-06-27
M2.164 km WSW of Dundee, Oregonreviewed2026-08-04
M1.897 km SW of Arlington, Oregonreviewed2026-07-01
M1.815 km SSE of Monroe, Oregonreviewed2026-06-25
M1.797 km E of Pistol River, Oregonreviewed2026-08-07
M1.783 km E of Lexington, Oregonreviewed2026-06-25
M1.7625 km NW of Huntington, Oregonreviewed2026-07-23
M1.674 km NNW of Mount Hood Village, Oregonreviewed2026-07-02
M1.628 km E of Pistol River, Oregonreviewed2026-06-23
How this page decides a place is in Oregon. USGS writes the region after the last comma of the place string, and we map that tail from an explicit table — we never geocode the coordinates. An event just offshore or just over a border is assigned the way USGS wrote it, and an event whose place string carries no comma is never assigned here at all. The complete table is on the methodology page.
Days we did not seal. 45 seals span 47 calendar days, so these days inside the span have no sealed copy: 2026-07-04, 2026-07-15. A missing day means we did not read the feed. It does not mean nothing happened, and those dates return a 404 here rather than a page reading zero.
One seal is wider than the others. These dates were collected more than once: 2026-07-16 (2 runs, 00:48 and 13:42 UTC). A day with two runs covers more than 24 source-hours, so its event count is larger for a collection reason and not a seismic one. Do not read it as a busy day.

Compiled from dated copies of the U.S. Geological Survey's public all_day realtime feed (a work of the US government, in the public domain). Values are reproduced exactly as USGS published them on the date shown and may since have been revised; USGS is the authority on the current value of any event. These pages are provided for informational purposes only, carry no warranty of accuracy or completeness, and are not an earthquake warning, a safety notice, or engineering advice. Always verify against the USGS Earthquake Hazards Program before relying on any figure.

Earthquake record home · What the record changed · How this is collected · US Tech Automations.