M1.0 – M1.9 Events in Texas

629 events in the M1.0 – M1.9 range whose USGS place string ends in Texas, across 45 of our daily seals.

What this archive is, exactly. The USGS all_day feed holds the last 24 hours and is overwritten in place. We seal one dated copy of it per day. An event that appeared in the feed and was superseded between two of our seals is not in this archive at all. These pages are a record of what USGS asserted at each seal — they are not a complete catalogue of earthquakes, and nothing here should be read as one.

Review status as sealed: automatic 373, reviewed 256. An automatic value is a machine solution USGS may still revise; a reviewed value has had a human look at it. Which one you are reading matters more than the magnitude itself.

0 of 629 events in Texas in this range were sealed at or above M3.5 — the magnitude Texas Railroad Commission seismic-response conditions are written around. That is a count of what the feed said, not a determination about any permit, operator or well.

Get told when the record changes for Texas

USGS publishes the last day and overwrites it, then revises events in place — automatic becomes reviewed, magnitudes move, and the old value stops existing everywhere. We seal a dated copy every day. Leave your email and we'll tell you when an event in Texas is revised after the fact, with what it said before.

Email me revisions for Texas →

Work email only. No newsletter, no obligation.

Prefer to just buy it? See the custom, source-cited close file, priced, with a sample deliverable.

Largest in this range

Magnitude	Place, as published	Review status	Seal
M1.90	18 km NNW of Toyah, Texas	reviewed	2026-06-23
M1.90	52 km WNW of Toyah, Texas	automatic	2026-06-25
M1.90	29 km SE of Balmorhea, Texas	automatic	2026-06-29
M1.90	47 km NW of Toyah, Texas	automatic	2026-06-29
M1.90	19 km NW of Westbrook, Texas	reviewed	2026-07-01
M1.90	12 km ESE of Pearsall, Texas	reviewed	2026-07-01
M1.90	19 km S of Lindsay, Texas	automatic	2026-07-06
M1.90	12 km SSW of Lindsay, Texas	automatic	2026-07-07
M1.90	24 km WNW of Balmorhea, Texas	automatic	2026-07-07
M1.90	16 km NW of Stanton, Texas	reviewed	2026-07-07
M1.90	36 km NW of Toyah, Texas	reviewed	2026-07-07
M1.90	65 km NNE of Van Horn, Texas	automatic	2026-07-08
M1.90	11 km ESE of Lindsay, Texas	reviewed	2026-07-09
M1.90	45 km NW of Toyah, Texas	automatic	2026-07-11
M1.90	44 km NW of Toyah, Texas	automatic	2026-07-11
M1.90	42 km NW of Toyah, Texas	automatic	2026-07-11
M1.90	51 km W of Mentone, Texas	automatic	2026-07-12
M1.90	10 km ESE of Pearsall, Texas	automatic	2026-07-12
M1.90	53 km NW of Toyah, Texas	reviewed	2026-07-16
M1.90	56 km NW of Toyah, Texas	reviewed	2026-07-16

All magnitudes in Texas · M1.0 – M1.9 worldwide.

Days we did not seal. 45 seals span 47 calendar days, so these days inside the span have no sealed copy: 2026-07-04, 2026-07-15. A missing day means we did not read the feed. It does not mean nothing happened, and those dates return a 404 here rather than a page reading zero.

One seal is wider than the others. These dates were collected more than once: 2026-07-16 (2 runs, 00:48 and 13:42 UTC). A day with two runs covers more than 24 source-hours, so its event count is larger for a collection reason and not a seismic one. Do not read it as a busy day.

Compiled from dated copies of the U.S. Geological Survey's public all_day realtime feed (a work of the US government, in the public domain). Values are reproduced exactly as USGS published them on the date shown and may since have been revised; USGS is the authority on the current value of any event. These pages are provided for informational purposes only, carry no warranty of accuracy or completeness, and are not an earthquake warning, a safety notice, or engineering advice. Always verify against the USGS Earthquake Hazards Program before relying on any figure.

Earthquake record home · What the record changed · How this is collected · US Tech Automations.