Earthquake record › Utah › M2.0 – M2.9

M2.0 – M2.9 Events in Utah

29 events in the M2.0 – M2.9 range whose USGS place string ends in Utah, across 18 of our daily seals.

What this archive is, exactly. The USGS all_day feed holds the last 24 hours and is overwritten in place. We seal one dated copy of it per day. An event that appeared in the feed and was superseded between two of our seals is not in this archive at all. These pages are a record of what USGS asserted at each seal — they are not a complete catalogue of earthquakes, and nothing here should be read as one.

Review status as sealed: reviewed 29. An automatic value is a machine solution USGS may still revise; a reviewed value has had a human look at it. Which one you are reading matters more than the magnitude itself.

0 of 29 events in Utah in this range were sealed at or above M3.5 — the magnitude Texas Railroad Commission seismic-response conditions are written around. That is a count of what the feed said, not a determination about any permit, operator or well.

Get told when the record changes for Utah

USGS publishes the last day and overwrites it, then revises events in place — automatic becomes reviewed, magnitudes move, and the old value stops existing everywhere. We seal a dated copy every day. Leave your email and we'll tell you when an event in Utah is revised after the fact, with what it said before.

Email me revisions for Utah →

Work email only. No newsletter, no obligation.

Prefer to just buy it? See the custom, source-cited close file, priced, with a sample deliverable.

Largest in this range

MagnitudePlace, as publishedReview statusSeal
M2.866 km NNW of Saratoga Springs, Utahreviewed2026-08-08
M2.789 km N of New Harmony, Utahreviewed2026-08-05
M2.5912 km E of Millville, Utahreviewed2026-06-25
M2.5616 km NE of Milford, Utahreviewed2026-08-13
M2.5217 km NE of Milford, Utahreviewed2026-09-04
M2.407 km NE of Hildale, Utahreviewed2026-09-05
M2.3716 km NE of Milford, Utahreviewed2026-09-04
M2.265 km E of Mount Pleasant, Utahreviewed2026-08-13
M2.2617 km NE of Milford, Utahreviewed2026-08-29
M2.1716 km NE of Milford, Utahreviewed2026-08-26
M2.143 km W of Circleville, Utahreviewed2026-07-22
M2.148 km SSW of Randolph, Utahreviewed2026-08-06
M2.114 km W of Circleville, Utahreviewed2026-07-22
M2.1116 km NE of Milford, Utahreviewed2026-09-01
M2.1116 km NE of Milford, Utahreviewed2026-09-04
M2.1016 km NE of Milford, Utahreviewed2026-09-01
M2.0916 km NE of Milford, Utahreviewed2026-08-26
M2.0916 km NE of Milford, Utahreviewed2026-09-02
M2.0815 km WNW of Howell, Utahreviewed2026-08-29
M2.0717 km NE of Milford, Utahreviewed2026-09-03

All magnitudes in Utah · M2.0 – M2.9 worldwide.

Days we did not seal. 69 seals span 77 calendar days, so these days inside the span have no sealed copy: 2026-07-04, 2026-07-15, 2026-08-14, 2026-08-15, 2026-08-16, 2026-08-17, 2026-08-22, 2026-08-23. A missing day means we did not read the feed. It does not mean nothing happened, and those dates return a 404 here rather than a page reading zero.
One seal is wider than the others. These dates were collected more than once: 2026-07-16 (2 runs, 00:48 and 13:42 UTC), 2026-08-18 (2 runs, 05:41 and 23:15 UTC), 2026-08-24 (12 runs, 00:43 and 11:00 UTC), 2026-08-25 (11 runs, 02:00 and 22:09 UTC), 2026-08-26 (4 runs, 00:05 and 22:05 UTC), 2026-08-27 (4 runs, 00:05 and 22:09 UTC), 2026-08-28 (4 runs, 00:05 and 22:08 UTC), 2026-08-29 (4 runs, 00:08 and 22:05 UTC), 2026-08-30 (4 runs, 00:07 and 22:05 UTC), 2026-08-31 (4 runs, 00:05 and 22:08 UTC), 2026-09-01 (4 runs, 00:06 and 22:10 UTC), 2026-09-02 (4 runs, 00:05 and 22:05 UTC), 2026-09-03 (4 runs, 00:09 and 22:09 UTC), 2026-09-04 (4 runs, 00:07 and 22:08 UTC), 2026-09-05 (4 runs, 00:08 and 22:06 UTC), 2026-09-06 (4 runs, 00:09 and 22:08 UTC), 2026-09-07 (4 runs, 00:09 and 22:05 UTC). A day with two runs covers more than 24 source-hours, so its event count is larger for a collection reason and not a seismic one. Do not read it as a busy day.

Compiled from dated copies of the U.S. Geological Survey's public all_day realtime feed (a work of the US government, in the public domain). Values are reproduced exactly as USGS published them on the date shown and may since have been revised; USGS is the authority on the current value of any event. These pages are provided for informational purposes only, carry no warranty of accuracy or completeness, and are not an earthquake warning, a safety notice, or engineering advice. Always verify against the USGS Earthquake Hazards Program before relying on any figure.

Earthquake record home · What the record changed · How this is collected · US Tech Automations.