Earthquake record › Utah › Below M1.0

Below M1.0 Events in Utah

26 events in the Below M1.0 range whose USGS place string ends in Utah, across 17 of our daily seals.

What this archive is, exactly. The USGS all_day feed holds the last 24 hours and is overwritten in place. We seal one dated copy of it per day. An event that appeared in the feed and was superseded between two of our seals is not in this archive at all. These pages are a record of what USGS asserted at each seal — they are not a complete catalogue of earthquakes, and nothing here should be read as one.

Review status as sealed: reviewed 26. An automatic value is a machine solution USGS may still revise; a reviewed value has had a human look at it. Which one you are reading matters more than the magnitude itself.

0 of 26 events in Utah in this range were sealed at or above M3.5 — the magnitude Texas Railroad Commission seismic-response conditions are written around. That is a count of what the feed said, not a determination about any permit, operator or well.

Get told when the record changes for Utah

USGS publishes the last day and overwrites it, then revises events in place — automatic becomes reviewed, magnitudes move, and the old value stops existing everywhere. We seal a dated copy every day. Leave your email and we'll tell you when an event in Utah is revised after the fact, with what it said before.

Email me revisions for Utah →

Work email only. No newsletter, no obligation.

Prefer to just buy it? See the custom, source-cited close file, priced, with a sample deliverable.

Largest in this range

MagnitudePlace, as publishedReview statusSeal
M0.9916 km NE of Milford, Utahreviewed2026-07-07
M0.9917 km NE of Milford, Utahreviewed2026-07-08
M0.974 km ENE of Hildale, Utahreviewed2026-07-22
M0.9613 km NE of Milford, Utahreviewed2026-08-07
M0.9517 km NE of Milford, Utahreviewed2026-08-04
M0.9334 km ESE of Elmo, Utahreviewed2026-07-14
M0.9217 km NE of Milford, Utahreviewed2026-07-07
M0.9216 km NE of Milford, Utahreviewed2026-07-10
M0.8816 km NE of Milford, Utahreviewed2026-07-09
M0.8817 km NE of Milford, Utahreviewed2026-07-24
M0.8314 km NE of Milford, Utahreviewed2026-07-16
M0.760 km W of Beaver, Utahreviewed2026-07-29
M0.7417 km NE of Milford, Utahreviewed2026-07-07
M0.7314 km NE of Milford, Utahreviewed2026-08-03
M0.7029 km NE of Fremont, Utahreviewed2026-07-28
M0.705 km ENE of Magna, Utahreviewed2026-07-28
M0.655 km SW of Wallsburg, Utahreviewed2026-07-20
M0.616 km NNE of Summit Park, Utahreviewed2026-07-16
M0.6018 km NE of Milford, Utahreviewed2026-07-18
M0.5517 km NE of Milford, Utahreviewed2026-07-08

All magnitudes in Utah · Below M1.0 worldwide.

Days we did not seal. 45 seals span 47 calendar days, so these days inside the span have no sealed copy: 2026-07-04, 2026-07-15. A missing day means we did not read the feed. It does not mean nothing happened, and those dates return a 404 here rather than a page reading zero.
One seal is wider than the others. These dates were collected more than once: 2026-07-16 (2 runs, 00:48 and 13:42 UTC). A day with two runs covers more than 24 source-hours, so its event count is larger for a collection reason and not a seismic one. Do not read it as a busy day.

Compiled from dated copies of the U.S. Geological Survey's public all_day realtime feed (a work of the US government, in the public domain). Values are reproduced exactly as USGS published them on the date shown and may since have been revised; USGS is the authority on the current value of any event. These pages are provided for informational purposes only, carry no warranty of accuracy or completeness, and are not an earthquake warning, a safety notice, or engineering advice. Always verify against the USGS Earthquake Hazards Program before relying on any figure.

Earthquake record home · What the record changed · How this is collected · US Tech Automations.