Earthquake record › the U.S. Virgin Islands

the U.S. Virgin Islands in the Sealed USGS Record

94 events whose USGS place string ends in the U.S. Virgin Islands, across 48 of our daily seals. Counts are of what we sealed, not of what occurred.

What this archive is, exactly. The USGS all_day feed holds the last 24 hours and is overwritten in place. We seal one dated copy of it per day. An event that appeared in the feed and was superseded between two of our seals is not in this archive at all. These pages are a record of what USGS asserted at each seal — they are not a complete catalogue of earthquakes, and nothing here should be read as one.

Review status as sealed: reviewed 94. An automatic value is a machine solution USGS may still revise; a reviewed value has had a human look at it. Which one you are reading matters more than the magnitude itself.

By magnitude

Magnitude	Events
Below M1.0	0
M1.0 – M1.9	0
M2.0 – M2.9	27
M3.0 – M3.9	64
M4.0 – M4.9	3
M5.0 and above	0
No magnitude published	0

20 of 94 events in the U.S. Virgin Islands were sealed at or above M3.5 — the magnitude Texas Railroad Commission seismic-response conditions are written around. That is a count of what the feed said, not a determination about any permit, operator or well.

Get told when the record changes for the U.S. Virgin Islands

USGS publishes the last day and overwrites it, then revises events in place — automatic becomes reviewed, magnitudes move, and the old value stops existing everywhere. We seal a dated copy every day. Leave your email and we'll tell you when an event in the U.S. Virgin Islands is revised after the fact, with what it said before.

Email me revisions for the U.S. Virgin Islands →

Work email only. No newsletter, no obligation.

Prefer to just buy it? See the custom, source-cited close file, priced, with a sample deliverable.

Narrower views

M2.0 – M2.9 27
M3.0 – M3.9 64

Present but below our page threshold, so named here instead of given a page: M4.0 – M4.9 (3).

Largest events on record here

Magnitude	Place, as published	Review status	Seal
M4.41	150 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-08
M4.07	49 km N of Charlotte Amalie, U.S. Virgin Islands	reviewed	2026-08-02
M4.04	140 km N of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-02
M3.89	143 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-06-29
M3.84	141 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-27
M3.82	89 km NE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-08-05
M3.81	140 km N of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-11
M3.79	61 km NE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-08-09
M3.78	134 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-07
M3.77	75 km NE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-08-31
M3.73	28 km NW of Charlotte Amalie, U.S. Virgin Islands	reviewed	2026-07-02
M3.73	76 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-27
M3.73	132 km N of Charlotte Amalie, U.S. Virgin Islands	reviewed	2026-08-09
M3.70	143 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-06-30
M3.67	69 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-08
M3.67	135 km N of Charlotte Amalie, U.S. Virgin Islands	reviewed	2026-08-05
M3.65	63 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-08-12
M3.56	108 km N of Charlotte Amalie, U.S. Virgin Islands	reviewed	2026-07-21
M3.54	152 km NNE of Cruz Bay, U.S. Virgin Islands	reviewed	2026-07-24
M3.50	85 km N of Cruz Bay, U.S. Virgin Islands	reviewed	2026-08-04

How this page decides a place is in the U.S. Virgin Islands. USGS writes the region after the last comma of the place string, and we map that tail from an explicit table — we never geocode the coordinates. An event just offshore or just over a border is assigned the way USGS wrote it, and an event whose place string carries no comma is never assigned here at all. The complete table is on the methodology page.

Days we did not seal. 68 seals span 76 calendar days, so these days inside the span have no sealed copy: 2026-07-04, 2026-07-15, 2026-08-14, 2026-08-15, 2026-08-16, 2026-08-17, 2026-08-22, 2026-08-23. A missing day means we did not read the feed. It does not mean nothing happened, and those dates return a 404 here rather than a page reading zero.

One seal is wider than the others. These dates were collected more than once: 2026-07-16 (2 runs, 00:48 and 13:42 UTC), 2026-08-18 (2 runs, 05:41 and 23:15 UTC), 2026-08-24 (12 runs, 00:43 and 11:00 UTC), 2026-08-25 (11 runs, 02:00 and 22:09 UTC), 2026-08-26 (4 runs, 00:05 and 22:05 UTC), 2026-08-27 (4 runs, 00:05 and 22:09 UTC), 2026-08-28 (4 runs, 00:05 and 22:08 UTC), 2026-08-29 (4 runs, 00:08 and 22:05 UTC), 2026-08-30 (4 runs, 00:07 and 22:05 UTC), 2026-08-31 (4 runs, 00:05 and 22:08 UTC), 2026-09-01 (4 runs, 00:06 and 22:10 UTC), 2026-09-02 (4 runs, 00:05 and 22:05 UTC), 2026-09-03 (4 runs, 00:09 and 22:09 UTC), 2026-09-04 (4 runs, 00:07 and 22:08 UTC), 2026-09-05 (4 runs, 00:08 and 22:06 UTC), 2026-09-06 (3 runs, 00:09 and 05:43 UTC). A day with two runs covers more than 24 source-hours, so its event count is larger for a collection reason and not a seismic one. Do not read it as a busy day.

Compiled from dated copies of the U.S. Geological Survey's public all_day realtime feed (a work of the US government, in the public domain). Values are reproduced exactly as USGS published them on the date shown and may since have been revised; USGS is the authority on the current value of any event. These pages are provided for informational purposes only, carry no warranty of accuracy or completeness, and are not an earthquake warning, a safety notice, or engineering advice. Always verify against the USGS Earthquake Hazards Program before relying on any figure.

Earthquake record home · What the record changed · How this is collected · US Tech Automations.