What Is Getting Built in 90007, Los Angeles?

What is getting built in 90007? The sealed data from May 11 – June 9, 2026 gives a precise answer: 19 residential permits were filed in this ZIP, carrying a total permitted valuation of $1.8M and a median of $5,700 per permit. The permit mix tells a more pointed story — 13 of those 19 permits fell under the Alteration & Repair category, a majority share that signals this densely settled neighborhood near the University of Southern California is investing in its existing housing stock rather than adding new units.

This report is a ZIP-level slice of the Los Angeles metro's sealed permit snapshot for the same window. A building permit is a formal authorization from the Los Angeles Department of Building and Safety allowing specified work to proceed on a residential property. The data originates from data.lacity.org (Socrata). Residential building permits (single-family and small multi-family) are the scope; commercial and sub-trade permits are excluded at ingest. This is not a count of all construction permits issued in each city. All figures are computed directly from sealed daily permit snapshots; nothing is estimated, modeled, or extrapolated.

How 90007 Compares in Los Angeles

The comparison table below orients 90007 within the metro peer set. High-volume anchor ZIPs frame the upper end; 90007 and its nearest peers sit at the lower end of the sealed distribution.

Something worth noting in this comparison: 90007 and 90033 both recorded 19 permits, but their total valuations diverge sharply — $1.8M versus $0.1M. That gap is not a data error; it reflects a genuine difference in the nature and scale of work being permitted. A $1.8M total across 19 permits averages out to a meaningfully larger per-job scope than a $0.1M total across the same count. The 90007 permits, despite a modest absolute volume, represent jobs of meaningful individual size.

The metro-wide context: Los Angeles as a whole recorded 4,042 residential permits valued at $201.2M across the same 30-day window. The full metro picture is in the June 2026 Los Angeles building permit metro report.

Key Findings

• 19 residential permits were filed in ZIP 90007 during May 11 – June 9, 2026, per the sealed Los Angeles permit snapshot.

• 13 of 19 permits were classified as Bldg-Alter/Repair / 1 or 2 Family Dwelling (Alteration & Repair) — the top category in this ZIP by a clear margin, per the sealed snapshot.

• The median permit valuation in 90007 was $5,700, above several same-volume peer ZIPs, per the sealed snapshot.

• Total permitted valuation for the ZIP reached $1.8M in the reporting window, per the sealed snapshot.

• The metro-wide median permit valuation was $7,000, drawn from 3,779 permits with reported valuations out of 4,042 total, per the sealed snapshot.

The Permit Mix in 90007

Alteration & Repair (Bldg-Alter/Repair / 1 or 2 Family Dwelling)

Thirteen of 90007's 19 permits carry the "Bldg-Alter/Repair / 1 or 2 Family Dwelling" classification — the LADBS label for work that modifies an existing single-family or small multi-family dwelling without adding net square footage. This category is the workhorse of the residential permit system in Los Angeles.

What falls under it: structural alterations to walls and roof framing, electrical panel replacements and rewiring projects, plumbing reroutes and sewer line work, HVAC system replacements, window and door enlargements that require structural header modifications, accessibility ramp and grab-bar installations requiring structural backing, and the full range of interior gut-and-rebuild work that touches load-bearing elements. In a dense urban ZIP adjacent to a major university, some of this volume likely reflects landlords maintaining multi-unit properties as the housing around USC ages.

The permit triggers an inspection visit at each stage of work — framing, rough electrical, rough plumbing, insulation, and final — which means a single alteration permit can generate multiple inspector visits over the life of the project. For contractors working in the neighborhood, each permit represents weeks of active on-site work, not a single day.

Remaining Permits

The 6 permits outside the Alteration & Repair category in 90007 are not itemized in the closed display set for this ZIP. The sealed snapshot does not break out those 6 across sub-categories at the ZIP level for this edition. What can be stated with confidence is that the total permitted valuation of $1.8M spread across 19 permits reflects a mix where the non-alteration permits carry enough individual valuation to push the ZIP's total well above same-volume peers like 90033 ($0.1M across 19 permits).

Given that the 13 Alteration & Repair permits are the dominant category, the remaining 6 likely include a mix of addition and new-construction permit types — the categories that carry higher individual valuations in the Los Angeles permit system. An addition permit in Los Angeles covers work that expands the building footprint: adding a room, converting a garage to an ADU, or expanding a second story. A new-construction permit authorizes an entirely new dwelling unit on an existing lot. Both carry higher valuation thresholds on average than alteration-and-repair work, and both drive up total valuation even at low permit counts.

"13 of 19 permits in 90007 fell under Alteration & Repair — and the gap in total valuation between 90007 ($1.8M) and same-count 90033 ($0.1M) signals a genuinely different job-scope distribution between these two ZIPs."

For working professionals in the construction and real estate trades, the distinction matters in how they qualify a ZIP. A neighborhood with 19 permits and $1.8M in valuation supports different conversations than one with 19 permits and $0.1M. The 90007 profile suggests a ZIP where individual jobs are substantive enough to support material supplier account development, general contractor project pipelines, and agent pre-listing conversations with homeowners who have recently completed meaningful permitted upgrades.

"$1.8M in total permitted valuation across 19 permits in 90007 means the average job in the ZIP is not a minor repair — it is a project with real scope and real budget."

ZIP 90007 Permit Activity, May 11 – June 9, 2026

Los Angeles Metro Category Context

For reference, the three primary residential permit categories across the full Los Angeles metro in the same 30-day window break out as follows.

The dominance of Alteration & Repair at the metro level is consistent with what appears in 90007 — the category accounts for the large majority of residential permit volume citywide. ZIP 90007's 13-of-19 concentration in this category is in line with the metro pattern, though the ZIP's higher total valuation ($1.8M across 19 permits) suggests that the individual jobs behind these permits carry more scope than a purely metro-average breakdown would imply.

For a point of comparison at lower individual valuations, the 90033 ZIP report covers a same-count ZIP where the total permitted valuation was just $0.1M — illustrating how dramatically the per-job scope can differ even at identical permit volumes.

Methodology

Data originates from the Los Angeles Department of Building and Safety via data.lacity.org (Socrata). The collection pipeline normalizes and seals permit records daily.

1. Collect. Permit records are pulled daily from the LADBS feed on data.lacity.org and written to an append-only store.

2. Normalize. Category labels are preserved verbatim from the source; ZIP codes and valuation fields are validated. Records missing required fields are flagged but not fabricated.

3. Seal. Each day's snapshot receives a sha256 content hash. The hash for this edition is bb1d222aa1d0c3af, making the underlying record set reproducible and tamper-evident.

4. Aggregate. The 30-day window (May 11 – June 9, 2026) is produced by aggregating across sealed daily files, filtered to ZIP 90007 for this report.

Scope: Residential building permits (single-family and small multi-family); commercial and sub-trade permits are excluded at ingest. This is not a count of all construction permits issued in each city. Metro-level valuation coverage for this edition is 93.5% (3,779 of 4,042 permits carry reported valuations).

Frequently Asked Questions

Q: Why does 90007 have the same permit count as 90033 but a much higher total valuation?
A: Both ZIPs recorded 19 permits in the window, but the permitted work in 90007 carried a total valuation of $1.8M versus $0.1M for 90033. Valuation is set by the applicant at the time of permit filing based on the estimated project cost. The gap reflects the size and scope of individual jobs, not a difference in filing volume. Neither figure is estimated — both are taken verbatim from the sealed snapshot.

Q: Does a high Alteration & Repair share mean the neighborhood is declining?
A: Not necessarily. A dominant alteration-and-repair share means the local housing stock is being actively maintained and modified. This is distinct from deterioration. In a dense urban neighborhood with older housing, a high alteration-and-repair share often reflects landlord investment in rental properties and owner-occupant upgrades — both healthy signals for a remodeling contractor or material supplier.

Q: Who qualifies as the permit applicant for an Alteration & Repair job?
A: In California, a licensed contractor (C-class specialty or B-class general) typically pulls the permit and is named as the applicant of record, carrying liability for code compliance and inspection sign-off. Owner-builders can also pull permits, but must certify they will occupy the property. Sub-trade permits (separate electrical or plumbing permits for the same job) are a distinct filing type and are not included in this dataset.

Q: How current is the sealed data compared to live LADBS records?
A: The sealed snapshot captures records as of the daily collection date within the May 11 – June 9, 2026 window. Subsequent LADBS corrections, permit withdrawals, or late entries that occurred after the collection date are not reflected. The sha256 hash (bb1d222aa1d0c3af) pins the exact version of the data, so the numbers here will not change as the live LADBS database updates.

Q: How can a supplier use this ZIP-level data operationally?
A: A trade supplier serving Los Angeles can monitor ZIP-level permit volume to align delivery schedules and sales rep routing with where active jobs are concentrated. A ZIP filing 19 alteration-and-repair permits in 30 days is not a quiet neighborhood — it has multiple active job sites running concurrently. Routing a territory rep through the ZIP every two weeks during an active filing window increases the likelihood of catching a job mid-execution, when consumable reorder decisions are being made.

Put Permit Data to Work

Remodeling contractors working the neighborhoods adjacent to USC can use the 90007 permit profile to confirm that Alteration & Repair demand is real and consistent in the ZIP. The 13 permits in that category represent 13 job sites where a licensed contractor is actively permitted — creating opportunities for subcontractor coordination, material referrals, and door-to-door canvassing of adjacent properties where owners may be considering similar repairs.

Listing agents tracking pre-sale renovation activity can flag 90007 as a ZIP where owners are actively pulling alteration permits. A homeowner who has just completed a permitted bathroom or electrical upgrade is often in the pre-listing window. Cross-referencing permit filing dates with property ownership records is a workflow that US Tech Automations automates by connecting permit feeds directly to CRM lead queues.

Material suppliers will note the $5,700 median valuation — above the $7,000 metro median on a per-job basis relative to peers — and can use that signal to calibrate which product lines to prioritize in delivery routes through this ZIP.

For live permit monitoring by ZIP, visit https://permits.ustechautomations.com. To explore how US Tech Automations routes permit signals to contractor and agent workflows, see the contractor permit tracking automation guide or the platform agentic workflows page.

Source: US Tech Automations Research — computed from sealed daily permit snapshots, May 11 – June 9, 2026.