15 Permits, $4,800 Median: ZIP 90710

ZIP 90710 recorded 15 residential building permits during the 30-day window ending June 9, 2026 — the same count as peer ZIPs 90059 and 91345. But the median valuation of $4,800 and the total declared valuation of $0.1M set 90710 apart from both of those neighbors in a meaningful way: this ZIP filed as many permits as its peers but at the lowest aggregate dollar value among the three.

The tension between volume and valuation is the story here. Fifteen permits in a 30-day window represents meaningful residential construction activity for a ZIP of this scale, particularly at the lower end of the Los Angeles metro's filing range. But $0.1M total — with a $4,800 median — means the typical permitted project in 90710 during this window was a small, focused scope: a structural repair, a localized renovation, a targeted system replacement. Every Alteration and Repair permit in this ZIP was at or below the floor of what many comparable ZIPs recorded as a single mid-range project.

This report presents sealed data from our research team, drawn from the Los Angeles Department of Building and Safety feed via data.lacity.org. A building permit in Los Angeles is the city's formal authorization for regulated construction or renovation work on a residential structure. The figures here are cross-sectional — one 30-day snapshot, not a trend — and every numeral is copied verbatim from the sealed ledger.

How 90710 Compares in Los Angeles

The comparison table is the right starting point for 90710 precisely because the valuation gap between this ZIP and its peers is the key fact. The peer band below shows the busiest ZIPs in the metro as high-volume anchors, followed by the ZIPs filing closest in volume to 90710.

Three ZIPs filed 15 permits each in this snapshot. ZIP 90059 reported $0.8M in total valuation for that same count. ZIP 91345 reported $0.3M. ZIP 90710 reported $0.1M — one-eighth of 90059 at the same permit volume. That is not a rounding artifact; it reflects a genuine difference in the scope and declared value of work being permitted. The $4,800 median in 90710 is the lowest among the trio.

"90710 filed 15 permits in the window — the same as its peers — but the $0.1M total is the lowest among all ZIPs in the peer band, suggesting a market of small, targeted renovation scopes." — computed from the sealed permit snapshots, May 11 – June 9, 2026

What does a $4,800 median project look like? In Los Angeles, this valuation range covers targeted, single-scope improvements: a seismic cripple-wall retrofit on a postwar bungalow, a bathroom fixture replacement with structural access, a roof repair involving rafter work, or an electrical panel upgrade requiring a permit but not a full rewire. These are not gut renovations; they are maintenance-tier improvements on existing structures. For a sibling ZIP at the same permit count but a higher median, see the ZIP 91345 permit report.

Key Findings

• ZIP 90710 recorded 15 residential permits during May 11 – June 9, 2026, according to our sealed permit snapshots.

• All 15 permits were in the "Bldg-Alter/Repair / 1 or 2 Family Dwelling" category, according to the sealed permit snapshots.

• The median permit valuation was $4,800 — below the metro-wide median of $7,000, according to the sealed snapshot.

• Total declared valuation for the window was $0.1M, the lowest among ZIPs filing 15 or more permits in this snapshot, according to the sealed permit snapshots.

• The broader LA metro recorded 4,042 residential permits totaling $201.2M in the same window, according to the sealed snapshot.

ZIP 90710 Permit Activity, May 11 – June 9, 2026

This report covers a ZIP-level slice of the Los Angeles metro sealed snapshot. Scope: residential building permits (single-family and small multi-family); commercial and sub-trade permits are excluded at ingest. This is not a count of all construction permits issued in each city.

What Is Getting Built in 90710

The most notable fact in the display set for 90710 is that all 15 permits fall into the Alteration and Repair category. There is no diversification in the permit mix for this ZIP during this window: every residential building permit issued in 90710 between May 11 and June 9, 2026, was an alteration or repair on a single-family or two-family home.

A 100% concentration in a single category at this permit count is uncommon and worth reading carefully. In a small-volume ZIP, it can simply be an artifact of which projects happened to be filed in a given 30-day period. But it can also reflect something structural: a housing stock where owners are focused on maintaining existing structures rather than expanding them, and where the scale of those investments is modest.

What "Bldg-Alter/Repair" Actually Covers

In the Los Angeles building department's classification system, "Bldg-Alter/Repair / 1 or 2 Family Dwelling" captures a wide range of residential work. The common thread is that the work modifies an existing structure without adding square footage or creating a new unit. In practice, in a ZIP like 90710 — which sits in the Harbor Gateway and Harbor City area of the South Bay, a working-class suburban zone with a substantial stock of postwar single-family homes — this category often reflects:

Seismic retrofits. Older wood-frame homes on cripple walls are candidates for FEMA-recommended retrofits, which in LA require a building permit even when the visible scope is limited to bolting and bracing in the crawlspace.

Roof and siding repairs. When a re-roofing project involves replacing or repairing the underlying sheathing or rafters, it crosses the threshold from cosmetic work into permitted building-repair territory.

Kitchen and bath alterations. Modifications to plumbing rough-in locations or load-bearing walls in a kitchen or bathroom renovation require a building permit even when the electrical and plumbing sub-trades pull their own separate permits.

Structural repairs. Foundation cracks, deteriorated posts, and other structural deficiencies require permitted repair work from a licensed contractor.

The $4,800 median is consistent with the lower end of these scopes — a targeted seismic retrofit or a structural repair rather than a full kitchen renovation. Projects in the $4,800 range are typically focused, single-contractor jobs where the permit is a compliance formality rather than an indicator of a large renovation budget.

Metro Context for the Category

At the metro level, Alteration and Repair is Los Angeles's dominant residential permit category by a significant margin: 2,486 of the metro's 4,042 residential permits during the window fell into this category. So 90710's complete concentration in Alteration and Repair is consistent with the broader metro pattern, not anomalous. What distinguishes 90710 is the per-permit valuation, not the category distribution.

90710 takes the citywide tilt toward alteration work to its extreme — every one of its 15 permits sits in the top category, with no additions or new construction in this slice.

"All 15 permits in ZIP 90710 were Alteration and Repair — a 100% category concentration pointing to a housing stock in steady maintenance mode." — computed from the sealed permit snapshots, May 11 – June 9, 2026

Methodology

Source: Los Angeles Department of Building and Safety via data.lacity.org (Socrata).

Honesty statement: All figures are computed directly from US Tech Automations' sealed daily permit snapshots; nothing is estimated, modeled, or extrapolated.

This ZIP-level report is a slice of the Los Angeles metro sealed snapshot for the window May 11 – June 9, 2026. The data is cross-sectional only. No comparisons to prior periods are made; this edition's snapshot does not contain data from other windows.

1. Collect. The pipeline pulls the LADBS permit feed from data.lacity.org (Socrata) daily, capturing issued residential building permits across Los Angeles.

2. Normalize. Each record is standardized: permit type, declared valuation, ZIP code, and issue date. Source category labels are preserved verbatim (e.g., "Bldg-Alter/Repair / 1 or 2 Family Dwelling") — they are not reclassified.

3. Seal. Daily snapshots are content-hashed and appended to the sealed ledger (snapshot SHA: bb1d222aa1d0c3af). Sealed records are never altered retroactively.

4. Aggregate. At window close, sealed records are aggregated to ZIP and metro totals. Permits without declared valuations are excluded from valuation statistics rather than assigned a zero.

Frequently Asked Questions

Q: Why does the 90710 total of $0.1M seem low compared to the 15-permit count?
A: The $4,800 median per permit reflects a pool of small-scope improvement jobs. Fifteen permits at that valuation range will total a modest dollar figure. This does not indicate errors in the data — it indicates that the work being permitted in 90710 during this window was at the lower end of the Alteration and Repair cost spectrum.

Q: Does 100% Alteration and Repair concentration mean no new homes were built in 90710?
A: Within the residential permit scope covered by this pipeline (single-family and small multi-family building permits from the LADBS), the display set shows no new construction permits for 90710 during this window. That does not rule out commercial construction, permits already in process but not yet issued, or activity outside the 30-day window.

Q: Who is working at the $4,800 permit valuation level in South Bay Los Angeles?
A: Projects in the $4,800 declared-value range are typically handled by specialty contractors — structural retrofitters, roofers, licensed repair contractors — or by homeowners self-performing within their legal scope. General contractors working at this valuation level often focus on targeted repairs rather than full renovations.

Q: How should a supplier read a ZIP with low-valuation, high-concentration alteration permits?
A: A $4,800 median and $0.1M total suggests the demand signal here is for maintenance and repair materials — structural hardware, sheathing, modest quantities of roofing and insulation materials — rather than high-ticket fixture and finish packages. A supplier serving this market would calibrate inventory and outreach for repair-tier projects, not large renovation bundles.

Q: How does this snapshot relate to what I might see if I queried data.lacity.org today?
A: The live database on data.lacity.org is updated continuously and may have changed since this snapshot was sealed. The sealed data in this report reflects the LADBS feed as of the close of the reporting window, content-hashed to SHA bb1d222aa1d0c3af. The live query may show corrections, new filings, or retroactive amendments not present in the sealed record.

Put Permit Data to Work

The 90710 permit profile — 15 permits, $4,800 median, $0.1M total, uniformly Alteration and Repair — has concrete value for several types of professionals.

Specialty repair contractors targeting the South Bay can read the $4,800 median as a signal that the active job size in 90710 during this window matches focused repair scopes. Seismic retrofit specialists, structural repair contractors, and roofing crews who work at this valuation level will find the permit density consistent with a qualifying territory: enough activity to justify outreach, at project sizes that match their typical scope.

Real estate agents working Harbor Gateway and Harbor City can use recent permit activity to frame listing conversations. A home where permitted work was recently completed — even a $4,800 structural repair — carries documentation that speaks to a buyer's inspector and lender. Agents who monitor permits can identify sellers who completed improvements recently and may be preparing to list.

Material distributors in the South Bay region can use the low-valuation, high-concentration Alteration and Repair pattern to calibrate their territory planning. ZIP 90710's profile suggests demand for maintenance-tier materials — structural fasteners, sheathing, small-quantity roofing — rather than kitchen and bath finish packages. Compare this profile to ZIP 90059, where a similar permit count produced $0.8M in total valuation, suggesting a fundamentally different product mix.

US Tech Automations automates permit monitoring for contractors, agents, and suppliers — pulling daily from the LADBS feed, bucketing filings by ZIP and permit type, and routing signals to the right professional. The system can be configured to automate outreach drafting when a target permit category is filed in a target territory, making permit data actionable without manual tracking. Explore the live feed at https://permits.ustechautomations.com.

For a view of how permit-signal automation works for property and trade professionals across Los Angeles, see the full metro permit report for June 2026 or the contractor permit tracking automation overview. To build automated permit workflows for your territory: explore agentic workflows for operations teams.

Source: US Tech Automations Research — computed from sealed daily permit snapshots, May 11 – June 9, 2026.