Best Structural Steel Estimating Software: 6 Tools for 2027
The short answer on the best structural steel estimating software
The best structural steel estimating software depends on which job you need done first: turning drawing sets into quantities, pricing a bid inside a fabrication system, or pulling quantities from a detailing model. Structural steel estimating software converts steel drawings or models into member counts, weights, connection quantities and a priced bid, and buyers often mix up the three product types that cover different parts of that job.
For a shop that bids from drawing sets and needs quantities fast, Steel Genie from ALLPLAN and SDS2 is the most concrete option in this list, because its vendor page describes the takeoff outputs in detail and publishes a license price. For a shop whose real problem is a bid that stalls between estimating, purchasing and production, Tekla PowerFab and STRUMIS are the quote-based candidates. EZIIL publishes monthly prices, but its page describes project and workload estimation rather than takeoff from drawings, so it belongs beside an estimator, not in place of one. Beam AI is worth testing when your takeoff spans several trades, because its pricing is set per trade. Autodesk Advance Steel is detailing software that produces quantities for fabrication; its vendor page does not describe estimating.
TL;DR: pick a takeoff tool if drawings are your bottleneck, a fabrication suite if the shop is, and confirm steel coverage, export format and the human review step in writing before you sign.
Key Takeaways
The category splits three ways: drawing takeoff tools (Steel Genie, Beam AI), fabrication suites with estimating modules (Tekla PowerFab, STRUMIS), and production tools with estimating features (EZIIL). Advance Steel sits upstream as detailing software.
Few vendors publish prices. Steel Genie, Beam AI and EZIIL do. Tekla PowerFab and STRUMIS are quote-based, and the Autodesk annual price field did not display a figure when we read it.
Public evidence is thin and mostly vendor-written. Review directories show almost no user reviews for these products, so treat vendor claims as claims until a trial confirms them.
Check takeoff scope before price. Steel Genie's connection calculations are for estimating only, and Beam AI's pages describe steel coverage in ways that do not match.
Every takeoff tool here still needs an estimator to approve the output. The vendors that describe a review step say so on their own pages.
Map the bid handoff before you buy. Exports, revision comparison and failed-alert handling decide whether a tool saves time or adds a re-keying step.
How we evaluated these tools
Our weighting favors what a small fabricator has to decide: whether a tool takes off structural steel, what it costs to find out, and what it hands to the rest of the shop. The weights below are our analysis, not vendor data. We included products that have an official site we could open and that are still sold, and we excluded products whose scope is sheet metal or whose official site we could not read.
| Criterion | Weight | Why it carries that weight |
|---|---|---|
| Structural-steel takeoff or estimating scope | 25% | The core question is whether the tool produces steel quantities at all. |
| Drawing input and export formats | 15% | Output that cannot reach a bid sheet or a fabrication system creates re-keying. |
| Published price or documented quote path | 15% | A budget comparison needs a number or a clear route to one. |
| Shop and production tie-in | 15% | Estimates that stay separate from purchasing and production add a hand-off step. |
| Implementation burden and prerequisites | 15% | Setup, data migration and integrations can drive first-year cost as much as the license. |
| Review evidence and human-check steps | 15% | Independent use evidence and a named review step lower the risk of a bad takeoff. |
Our evidence came from vendor pricing and product pages, two trade-press items that reproduce vendor announcements, and two review directories. Industry-association pages from AISC returned errors when we tried to read them, so we did not use their figures. We could not find an official site for FabSuite, and the prices shown for Ferra conflict across third-party directories, so neither is profiled or priced here. Directory benchmark estimates for STRUMIS exist, but they are not vendor prices, so we do not print them.
Normalized feature matrix
Each cell reflects what the vendor page or a cited listing says. "Not stated" means the pages we opened do not say, which is not the same as "No."
| Tool | Takeoff from drawings | Structural-steel scope stated | Estimating module | Shop or production tie-in | Human check stated | Export or integration stated |
|---|---|---|---|---|---|---|
| Tekla PowerFab | Not stated | Yes | Yes | Yes | Not stated | Not stated |
| STRUMIS | Not stated | Yes | Yes | Yes | Not stated | Directory listing only |
| EZIIL | Not stated | Partial | Partial | Yes | Not stated | Not stated |
| Steel Genie | Yes | Yes | Yes | Partial | Yes | Yes |
| Beam AI | Yes | Partial | Takeoff output only | Not stated | Yes | Not stated |
| Autodesk Advance Steel | Not stated | Yes | Not stated | Partial | Not stated | Yes |
Two cells need explaining. EZIIL's "Partial" steel scope reflects an EN 1090-2 compliance module that its pricing page lists as a separately priced add-on. Beam AI's "Partial" reflects a pricing page that lists steel in the self-serve plan, while an April 2026 release describes the steel rollout as still underway.
What the published prices cover
Every price in this section comes from a vendor page we opened, and each one sits beside its citation. Steel Genie is sold as a single license, and the page shows no billing terms: Steel Genie license: $9,950 per license according to SDS2 (2026).
Beam AI lists two construction plans on its pricing page, both on an annual basis. The self-serve plan is the cheaper entry point, and the page says it is available for HVAC, plumbing and steel: Self-serve plan: starts at $8K per trade according to Beam AI (2026). The done-for-you plan starts at $25K per year, based on trade and volume, according to Beam AI (2026). The page shows dollar signs but no currency code, and enterprise pricing is custom.
EZIIL is the only vendor here with tiered public pricing. The Starter tier on EZIIL covers 1–15 users at €120 per month or $140 per month, and the 16–50 user tier is €180 per month or $210 per month, according to EZIIL (2026). The page also lists a one-off onboarding fee of €300 or $350, and says annual billing saves 20%.
Tekla PowerFab and STRUMIS publish no prices and route buyers to sales, and SecturaFAB does the same. Autodesk's Advance Steel buy page shows an annual subscription that is 1-year or 3-year, and the annual price field did not display a figure when we read it.
| Vendor | Plan | Published price | Billing and add-ons |
|---|---|---|---|
| Tekla PowerFab | Full suite, sales quote | Quote-based | Not published |
| STRUMIS | MRP suite, sales quote | Quote-based | Not published |
| EZIIL | Starter, 1–15 users | €120 per month or $140 per month | Monthly; annual billing saves 20% |
| EZIIL | Starter, 16–50 users | €180 per month or $210 per month | Monthly; annual billing saves 20% |
| Steel Genie | Single license | $9,950 per license | Billing terms not published |
| Beam AI | Self-serve construction, per trade | Starts at $8K | Annual license per trade |
| Beam AI | Done-for-you construction | Starts at $25K | Annual license by trade and volume |
| Autodesk Advance Steel | Annual subscription | Not displayed on page read | 1-year or 3-year term |
| SecturaFAB | Quoting suite | Quote-based | Not published |
Pricing checked November 15, 2026. The quote-based rows have no public figure, and we have not estimated one.
Vendor profiles
Each profile separates what the vendor publishes from our read of fit. Where a limit is a gap in the public record, we say so rather than fill it in.
Steel Genie (ALLPLAN and SDS2)
Published facts: SDS2's Steel Genie page says the tool reads uploaded structural drawing sets, detects beams, columns, braces and other members, and produces standardized material takeoffs. Users can change sections and adjust connections before export, and the tool can compare drawing revisions to flag added, removed or changed members. Exports include Excel quantities, marked-up PDF reports and IFC models, and the page lists Tekla PowerFab and STRUMIS among IFC-compatible platforms. Upload, scanning and initial model generation take about 10–15 minutes, and project data is hosted on AWS in the United States. Architosh covers the April 2026 announcement, and its only customer voice is an early customer chosen by the vendor.
Limitations: connection calculations are for estimating only, not fabrication detailing. Detection depends on drawing clarity, and the page does not list accepted file formats. Billing terms are not published.
Implementation: plan a trial on your own drawing sets, and confirm which export your quoting system imports. An estimator reviews detected members before export, and that review time belongs in the schedule.
Our read: this is the strongest takeoff-first option in this list, and the wrong choice if your problem is shop scheduling.
Tekla PowerFab
Published facts: Trimble's PowerFab page describes a suite that runs a fabrication job from estimating through shipping, covering nesting, purchasing, inventory, production control, traceability and workshop monitoring. The page names estimators, project managers, production managers and purchasers as its users, and it refers to model-based estimating workflows and an up-to-date supplier pricing database. Pricing questions go to sales. Review evidence is minimal: Review base: 1 review, rated 4/5 according to SoftwareConnect (2026).
Limitations: the page does not describe takeoff from drawings, publishes no price, and has almost no user reviews to check against.
Implementation: the page does not describe an implementation scope. Ask for the scope, the data migration plan and the model formats it reads before you compare totals.
Our read: this fits a fabricator that wants bid through shipping in one system and can run a formal quote process.
STRUMIS
Published facts: the STRUMIS site lists modules for enquiries and estimating, production control and barcoding, inventory and material traceability, contract management, purchasing and QS analysis. It directs visitors to contact the company to arrange a demo and publishes no pricing. The directory Software Finder shows 0 reviews according to the same listing, and lists integrations with Tekla Structures, SDS2, Autodesk Advance Steel and BoCAD.
Limitations: the estimating module gets one sentence on the vendor site, so its depth is unknown until a demo. Integrations come from a third-party listing, so confirm them in writing.
Implementation: the vendor site publishes no implementation terms. Ask for the scope, including data migration and integrations, before you compare totals.
Our read: this fits a structural fabricator that wants enquiries, estimating and production in one MRP system and plans to pair it with a takeoff tool.
EZIIL
Published facts: EZIIL's pricing page lists one feature set for all plans. It includes shop-floor planning, a real-time production overview with delay alerts, drag-and-drop scheduling, production routing templates, a real-time project profit dashboard, planned-versus-actual reports and a mobile shop-floor app. "Project and workload estimation" appears in the feature list. Add-on modules are quote-based and include Bill of Materials, EN 1090-2 compliance, procurement, inventory and invoicing integrations.
Limitations: the page does not describe takeoff from drawings. Add-on modules are priced separately, so the full cost of a steel-specific setup cannot be fixed from the public page.
Implementation: the onboarding fee covers setup, team training and check-ins, and the inputs are standardized fields and file uploads.
Our read: EZIIL is a strong shop-floor layer. It is not the takeoff layer, so pair it with a takeoff tool if quantities come from drawings.
Beam AI
Published facts: Beam AI's pricing page lists a self-serve construction plan that is an annual license per trade, available for HVAC, plumbing and steel, and a done-for-you plan that covers all trades, including structural steel. Enterprise pricing is custom. An April 2026 release describes AI takeoffs in about 10 minutes and human-reviewed takeoffs in 24 to 72 hours, and says the structural steel rollout is underway with no completion date.
Limitations: the pricing page and the April release disagree on steel status, so confirm steel coverage for your drawing types in writing. The pricing page shows dollar signs without a currency code.
Implementation: prerequisites are plan sets and specifications, plus a choice between self-serve output and human-reviewed output for each project. Self-serve output still needs an estimator's review before it goes on a bid.
Our read: test Beam AI if your takeoff spans several trades, and treat the done-for-you option as the one that has a named human check.
Autodesk Advance Steel
Published facts: the Autodesk buy page describes Advance Steel as 3D software for steel model design and fabrication. It generates fabrication shop drawings, bills of material and numerical control files for CNC machines, and it does not mention estimating. Annual term: saves 33% over monthly according to Autodesk (2026). The page also lists monthly no-contract payment and Success Plans, but the price fields did not display amounts when we read them.
Limitations: it is not an estimating product, so you still need a bid tool. Your team also has to model in Advance Steel, and the time to learn the tool matters more than the license line.
Our read: choose it only if you already model in Advance Steel and want bills of material to feed a bid. Otherwise it does not solve the estimating question.
Products we did not profile
SecturaFAB's manufacturing quoting page describes estimating and quoting for metals fabrication, built around CAD imports and features such as nesting, unfolding, bend recognition and automatic weld detection. It publishes no prices and offers "Contact Us" and "Request a Demo." That scope is built for sheet metal, so it is a poor fit for beam-and-column takeoff. Ferra and FabSuite are excluded for the reasons given in the method section.
Proposed workflows around the estimate
Estimating software rarely ends at the bid total. Between takeoff and quote, someone copies quantities, chases revisions and checks whether an alert reached the estimator. US Tech Automations would be a configurable layer that sits between those steps, not a takeoff engine and not one of the six tools above. Both workflows below are proposed designs to configure and test. Neither is a deployment at any customer.
Proposed workflow A starts when a new revision of a drawing set lands in the bid folder. The proposed US Tech Automations flow would run the takeoff tool's revision comparison, which Steel Genie's page describes as flagging added, removed or changed members, and post a change list to the bid record. The output is a list of changed members with their quantities, not a revised bid total. Prerequisites are Excel or IFC exports from the takeoff tool and write access to the bid record. The human review point is that an estimator approves each added or removed member, and only the estimator can change the bid total. Vendor-claimed takeoff time: cut by up to 90% according to ConstructionDive (2026). That claim is worth testing on your own drawings before it shapes a bid calendar.
Proposed workflow B covers the failure path. When the flow sends a text alert to an estimator and the message fails, the Twilio Message resource returns a failed status with an error code, and the flow can write that code to the bid record and queue the message for re-sending by a person. The human review point is a daily check of the failure log. Prerequisites are a Twilio account, a verified sender number, and an estimator who owns the queue.
Build versus buy: Zapier, Make, n8n or in-house
Zapier, Make and n8n are the usual alternatives to a configurable layer, and they are fair options for a single handoff. Configured well, they can keep run histories, retries, error branches and audit evidence. A proposed US Tech Automations design could set up the same run history and retry logic from the start, but it needs the same prerequisites: export access, a writable bid record and a named reviewer. In either case, the buyer owns the hard parts: idempotency, so a retried step does not post a duplicate bid line; escalation paths; access controls; and maintenance when a vendor changes an export format.
Worked example: year-one cost per drawing set
Take an illustrative shop with 3 estimators who bid 40 drawing sets in a year. Three Steel Genie seats at $9,950 per license, according to SDS2 (2026), come to $29,850 before tax and before any billing terms the page does not publish, which is $746.25 per drawing set across 40 sets (29,850 ÷ 40). A small production team of 8 users on EZIIL's 1–15 user tier at $140 per month, according to EZIIL (2026), costs $1,680 over 12 months of monthly billing, plus the $350 onboarding fee, for $2,030 in year one. Those two figures buy different jobs and are not interchangeable. If a proposed alert to the estimator fails, the Twilio Message resource returns error_code with a failed status, and that is the field the flow should log so the failed alert gets re-sent.
| Line item | Quantity | Published unit price | Year-one total | Per drawing set (40 sets) |
|---|---|---|---|---|
| Steel Genie seats | 3 | $9,950 per license | $29,850 | $746.25 |
| EZIIL Starter, 8 users, monthly billing | 12 months | $140 per month | $1,680 | $42.00 |
| EZIIL onboarding fee | 1 | $350 | $350 | $8.75 |
| EZIIL year-one total | 1 | $2,030 | $2,030 | $50.75 |
This is cost arithmetic on published prices, not a measured result. The EZIIL row is a shop-floor cost, and it does not replace a takeoff tool.
Who this is for
Who this is for: owners and operations leads at small fabrication shops who bid structural steel from drawing sets, need one defensible number per bid, and must decide before a vendor can give them a price.
Red flags: your work is mainly sheet metal, which is the scope SecturaFAB is built for; your drawings are scanned at poor quality or arrive in formats your tools cannot export; or you need a published price before you speak to anyone, which rules out the quote-based products on this list.
Decision checklist:
Which inputs do you bid from: drawing sets, models, or both?
Which file format does your quoting or ERP system import?
Is steel coverage live for your drawing types, confirmed in writing?
What is in the implementation scope, including data migration and integrations?
Who approves each takeoff before a bid total changes?
Which add-ons do you need, and are they priced separately?
When NOT to use US Tech Automations
US Tech Automations is the wrong choice in three cases. If your only gap is drawing takeoff, a takeoff tool such as Steel Genie or Beam AI closes that gap more directly. If you want one vendor to run the shop floor from estimate to shipment, Tekla PowerFab or STRUMIS is built for that job, and a workflow layer adds a second system to maintain. If you have two estimators, one spreadsheet template and a shared folder, a simpler setup with no integration work will win on time to start. Ask first whether you need a workflow layer at all.
Common questions
Which structural steel estimating software publishes a price?
Steel Genie, Beam AI and EZIIL publish prices on their own pages, while Tekla PowerFab, STRUMIS and SecturaFAB are quote-based, and the Autodesk Advance Steel price field did not display a figure when we read it.
Do I need drawings in a specific format?
The vendor pages we opened do not list a full set of accepted formats, so confirm your drawing types in a trial before you buy.
Can a takeoff tool replace my estimator?
No, because the vendors that describe their output say a person reviews it: Steel Genie users review detected elements before export, and Beam AI offers a human-reviewed option.
Is Advance Steel an estimating tool?
No, the Autodesk page describes fabrication models, shop drawings, bills of material and numerical control files, and it does not mention estimating.
Should I build this with Zapier, Make or n8n?
Those tools can handle a single handoff well when you configure run histories, retries and error branches, but you still own idempotency, escalation, access controls and maintenance.
Why is the review evidence so thin?
Review directories show almost no user reviews for these products, so the evidence here comes mostly from vendor pages and two trade items that reproduce vendor announcements.
Next steps
Start with the job, then the price. If you bid from drawings, ask for a trial on three of your own drawing sets and time the takeoff against your current process. If the bottleneck is the shop floor, ask the quote-based vendors for implementation scope in writing before you compare totals. Either way, confirm steel coverage, export format and the human review step before you sign. To see how a configured workflow would sit between a takeoff tool and your bid record, see how US Tech Automations configures this.
About the Author

Helping businesses leverage automation for operational efficiency.