Skip to content
AI & Automation

Civil Takeoff Software: 3 Steps to Choose in 2027

Nov 17, 2026

Short answer: match the tool to the dirt on your bids

Civil takeoff software is a tool that measures earthwork and site quantities, such as cut and fill, grading areas and pipe lengths, from plans so an estimate can be priced. For dirt-heavy bids, the two tools in this guide whose pages name those functions are Gradework by AGTEK and Trimble Business Center. For length, area and count takeoff from PDFs, the candidates are PlanSwift, Bluebeam Revu, On-Screen Takeoff, STACK and Togal, and none of their pages named cut-and-fill or mass-haul functions when I read them.

Choose by the job first, then test one recent plan set in whichever trial the vendor offers. This is an informed buyer's guide built from public vendor pages, help documents and third-party listings. It does not report any trial of our own, and every price below is taken from the vendor page it names.

Key Takeaways

  • Choose by the work first: cut-and-fill and mass haul point to Gradework by AGTEK or Trimble Business Center, while PDF length, area and count work points to the PDF-first tools.

  • Four tools publish prices on their pages: PlanSwift, Bluebeam Revu, STACK and Togal. On-Screen Takeoff, Gradework and Trimble Business Center are quote-based on the pages I opened.

  • No PDF-first tool on this list named earthwork functions on the pages I read, so do not assume cut-and-fill support.

  • Trials differ: PlanSwift and On-Screen Takeoff state a free trial, and STACK states a free version of its Takeoff & Estimate tier.

  • Quantities only save time if they can leave the takeoff tool by export or API, and someone must own that path and review the output before a bid goes out.

  • Third-party price guides disagree with vendor pages in at least one case, so use the vendor page as the baseline and get the final quote in writing.

How we evaluated these tools

We weighted six criteria before reading any vendor page. The weights are our analysis, not vendor data, and each criterion needed evidence from a page we opened: a vendor pricing page, a help document, a developer page or an independent listing. A tool earns a check only when the page states the feature or price, and anything unstated is marked "not stated" rather than assumed.

CriterionWeightEvidence requiredWhy it matters
Earthwork or civil functions named on a page25%1 vendor or help pageDirt bids need cut-and-fill and mass-haul math, not only area counts
Measurement tools: length, area, count, volume20%1 vendor pageMost bid line items come from these measurements
Published price or written quote path20%1 pricing page + 1 independent sourceLets you budget before a sales call
Free trial or free tier10%1 pricing pageLets you test on a real plan set
Export, API or integration path15%1 help or developer pageDecides whether quantities can reach your estimate or accounting system
Training and support10%1 pricing pagePredicts how long a new estimator takes to become useful

What each tool measures

The matrix shows what each page I opened names. "No" means the page did not name the function. It does not prove the tool lacks it, so test that function in the trial before you buy.

ToolEarthwork or mass haul namedLength, area and count tools namedTrial or free tier
PlanSwiftNoTakeoff and estimating; Auto Count and Auto Scale on Essential; Takeoff BOOST on CoreFree trial stated
Bluebeam RevuNoLength and area on Basics; perimeter, count, angle and volume from CoreNot stated on the pricing page
STACKNoPlan Measurement and Markup; quantity, labor and material takeoffFree version stated
TogalNoUnlimited automated takeoffs on GrowthNot stated on the pricing page
On-Screen TakeoffNoLengths, areas, counts, auto count and overlayFree trial stated
Gradework by AGTEKYes: cut-and-fill, stockpile volumes, over-excavationQuantities by phase; input from PDF, CAD or manual entryNot stated on the page
Trimble Business CenterYes: earthwork and material quantities; mass haul for sites and corridorsNot described on the help pageNot stated on the page

Bluebeam Revu's measurement is general PDF measurement. It is useful for counts and areas on plan PDFs, but its pages do not present it as an earthwork engine.

Pricing: what the vendor pages publish

Pricing checked November 14, 2026. The table below uses only figures read on each vendor's own pricing page, each with its citation. Where the page gives no price, the table says Quote-based. The seat count is an illustrative team size, not a recommendation, and totals are arithmetic on the cited rate. They exclude add-ons, taxes, training fees and any discounts.

VendorPlan or tierSeats (illustrative)Published rateThree-seat annual cost
PlanSwiftEssential3$2,000 per seat per year (Core: $3,000), according to PlanSwift$6,000 (3 × $2,000)
BluebeamBasics3$260 per user per year (Core $330, Complete $440), according to Bluebeam$780 (3 × $260)
STACKTakeoff & Estimate3As low as $299 per user per month, according to STACK$10,764 (3 × $299 × 12 months)
TogalGrowth3$299 per user per month, billed yearly, according to Togal$10,764 (3 × $299 × 12 months)
On-Screen TakeoffSingle product3Quote-basedQuote-based
Gradework by AGTEKSingle product3Quote-basedQuote-based
Trimble Business CenterNot stated3Quote-basedQuote-based

On-Screen Takeoff's page says its pricing "varies based on licensing options and business needs." AGTEK's Gradework page says pricing is not published and asks buyers to contact sales. Trimble's help page describes features but gives no list price, so get a reseller quote for the modules you need.

Third-party guides do not always match vendor pages. Vertigraph's 2026 guide is a useful cross-check, but it sells a competing takeoff product, so treat its figures as a comparison rather than the baseline. Conflicting PlanSwift listing: $1,749 per year according to Vertigraph (2026). PlanSwift's own pricing page is the figure used in the table above.

Vendor profiles

Each profile separates what the vendor page says from our read, and links to the page the facts came from.

PlanSwift

What the page says: the Essential tier is annual and per seat, and it includes priority support and live one-on-one training with a PlanSwift specialist. The Core tier adds the Takeoff BOOST suite. Additional seats get discounted pricing, and larger license counts are quote-based. PlanSwift pricing

PlanSwift trial: 14 days, no credit card according to PlanSwift (2026).

Our read: PlanSwift fits small estimating teams that measure PDFs across trades and want a published seat price before a sales call. The pricing page I opened does not name earthwork, cut-and-fill or mass-haul functions. Start with one seat on the trial, measure one recent bid, and confirm the current quote in writing before you add seats.

Bluebeam Revu

What the page says: Basics includes length and area measurement but no perimeter or advanced measurements. Core adds perimeter, count, angle and volume measurement, plus CAD plug-ins and workflows. Complete adds Excel data linking and batch automation. All plans include phone and email support and Bluebeam University training. Bluebeam pricing

Bluebeam's developer documentation says Basics subscribers cannot use the Developer Portal, because they cannot create the Projects and Sessions the API needs. Bluebeam developer portal

Our read: Bluebeam Revu fits teams that already run PDF review and markup and need basic measurement on the same files. It is a PDF markup and measurement tool, not a civil takeoff engine, and its pages do not name cut-and-fill. Buy per user on an annual billing period, and check the regional price if you are outside the United States.

STACK

What the page says: the Takeoff & Estimate tier covers quantity, labor and material takeoff, flexible estimates and proposals, and unlimited plans and projects. The full platform starts as low as $348 per user per month, according to STACK, and its final price is built from configuration on a "Build Your Price" button. A free version is offered for Takeoff & Estimate, and a free trial is offered for Build & Operate. The page does not state whether these rates are billed monthly or annually.

Our read: STACK fits firms that want takeoff, estimating and field tools under one subscription and can handle a configured quote. The Takeoff & Estimate tier does not name earthwork functions, and field modules add cost on top of it. Confirm the billing period and what the configuration includes before you compare STACK with per-seat tools.

Togal

What the page says: the Growth plan is priced per user and billed yearly. It includes unlimited automated takeoffs, unlimited chat prompts and unlimited image and symbol searches. The Business plan is custom for teams of four or more users and adds onboarding, a dedicated support representative and single sign-on. Cancellation must happen before the renewal period. Togal pricing

Our read: Togal fits teams that want AI-driven automated takeoffs and accept per-user subscriptions. The Business price is not published, and the pricing page does not name earthwork functions. Use the Growth plan's "Try Now" path to test it, then ask sales about multi-license terms before you roll it out.

On-Screen Takeoff

What the page says: the product lists lengths, areas and counts, auto count, multi-condition takeoff and an overlay for comparing drawings side by side. Plans can be uploaded as PDF, DWG and other formats. The page offers a free trial and says pricing varies with licensing options and business needs. ConstructConnect's On-Screen Takeoff page

Free trial: 14 days according to ConstructConnect (2026).

Our read: On-Screen Takeoff fits estimators who measure lengths, areas and counts on PDF or DWG plans and want to test before they get a quote. No earthwork or cut-and-fill function appears on the page I opened, so check that scope during the trial. Run the trial on one recent plan set and ask for the quote in writing. PlanSwift and On-Screen Takeoff are both ConstructConnect products, so treat them as two options from one company rather than independent rivals.

Gradework by AGTEK

What the page says: the page describes cut-and-fill analysis, stockpile volumes and over-excavation quantities, with takeoff from PDF, CAD or manual entry. Outputs include machine-control models for Leica, Topcon and Trimble equipment, and customized exports to estimating programs. Pricing is not published, and buyers are directed to contact sales. AGTEK's Gradework page The URL reads sitework4d, but the content describes Gradework.

Our read: Gradework fits earthwork-heavy bidders who need cut-and-fill and stockpile math and who run machine-control equipment. It is quote-only, and the page I read does not state a trial. Before the sales call, prepare a sample CAD or PDF set and name an owner for the exports.

Trimble Business Center

What the help page says: the takeoff and mass haul tools calculate earthwork, material and cost quantities, generate takeoff reports, and create mass haul diagrams and reports for sites and corridors. They also manage over-excavation profiles. The help page does not list input file types. Trimble's takeoff and mass haul help

Our read: Trimble Business Center fits civil and heavy contractors who need mass haul and earthwork reports. It has no list price on the pages I opened, no stated input formats, and I could not confirm the current status of the older Trimble Paydirt product. Ask a reseller which product covers your takeoff, and get a quote that names the modules and training.

Who should choose which tool

Choose by the type of work first, then by the price terms you can get in writing.

ToolChoose it ifAvoid it if
PlanSwiftYou measure PDFs across trades and want a published annual seat priceYou need cut-and-fill or mass-haul math, which its pricing page does not name
Bluebeam RevuYou already run PDF review and need basic measurement on the same filesYou need an earthwork takeoff engine
STACKYou want takeoff, estimating and field tools in one subscriptionYou want a simple per-seat price with no configuration
TogalYou want AI-automated takeoffs and can budget per userYou need named earthwork functions on its pages
On-Screen TakeoffYou want a free trial before any quoteYou need cut-and-fill, which is not named
Gradework by AGTEKYou bid dirt work and need cut-and-fill, stockpile and machine-control outputsYour work is mostly PDF trades and you want a published price
Trimble Business CenterYou need mass haul and earthwork reports on civil or heavy jobsYou want a published list price before talking to sales

For dirt-heavy bids, SoftwareConnect's roundup was last updated October 12, 2026, according to SoftwareConnect. That roundup lists InSite Elevation Pro for earthwork takeoff and GPS modeling. I left it out of the profiles because I could not open its own pricing page.

Earthwork option in one roundup: $3,900 per year according to SoftwareConnect (2026).

Who this is for

This guide is for owners and operations leads at small construction businesses who are close to buying a takeoff tool and need to know which one measures their bids.

Red flags: your plan sets are mostly unscanned paper you have not digitized, nobody on staff will own the tool after purchase, or you expect software to replace estimator review of quantities.

When NOT to use US Tech Automations

If you only measure plans once in a while, a PDF tool with a trial, such as PlanSwift or Bluebeam Revu, is simpler than any workflow layer. If your estimator is comfortable re-keying a short takeoff into a spreadsheet, a spreadsheet with a checklist beats a configured workflow. If your takeoff tool already sends quantities to your accounting system through its own integration, use that integration first and skip a custom layer.

Getting quantities out of the takeoff tool

For many small bidders the costly step is not the measurement. It is retyping quantities into a bid sheet, an accounting system or a purchase order. US Tech Automations can design a configurable workflow for that step. It is a proposed design, not a live deployment, and nothing here describes a customer result.

The proposed trigger is an estimator changing a takeoff's status to ready for review. The proposed action is reading the quantity rows, meaning the item, unit and quantity, and mapping each row to your cost codes. The output is a draft bid summary or a draft bill in your accounting system, which nobody sends until a person approves it. The prerequisites are export or API access in the takeoff tool, plus a seat that is allowed to use it. For Bluebeam, that means a seat above Basics, since Basics subscribers cannot reach the developer portal.

Human review points sit in two places. An estimator checks quantities and unit costs before a draft leaves the workflow. An exception queue holds any row with no matching cost code, or any quantity the estimator flags for a second look. The cost codes and the flag rules come from your business, so you must supply them before the design can run.

Hypothetical example, not a measured result: a grading subcontractor with one estimator prepares 10 takeoffs a month at 6 hours each, which is 60 hours of takeoff work. Re-keying quantities into the bid takes 1 hour per takeoff, or 10 hours a month. If a configured export cut that re-keying by half, the firm would save 5 hours a month, or 60 hours a year, before review time. Before any export runs, a Bluebeam Studio integration needs an OAuth access_token, which is a setup task you must budget for, not a free step. The savings only hold if the export works and the estimator still reviews each draft.

Zapier, Make and n8n can move a CSV or call an API on a schedule. Configured well, they keep run histories, retries and error branches, and they can leave an audit trail. What you still own in those builds is observability, idempotency so a retry does not post the same bill twice, escalation paths, access controls and ongoing maintenance. A proposed US Tech Automations design could configure those points differently: a named reviewer as a hard stop before anything posts, an exception queue for cost codes with no match, and a per-run log of which quantities were pulled. Its prerequisites are the same as any build: export or API access, a test plan set, and an owner who maintains the workflow.

Decision checklist

  • Does the tool measure the work you bid: cut-and-fill and mass haul, or lengths, areas and counts?

  • Is there a published price, or a quote path you can get in writing?

  • Can you run the trial on one of your recent plan sets, and does the trial include the function you need?

  • Can quantities leave the tool by export or API, and who has access to that path?

  • Who reviews quantities before they reach a bid, and is that person named in writing?

Glossary

  • Cut and fill: the soil removed from high spots and placed in low spots to reach a design grade.

  • Mass haul: a diagram and calculation showing where earth moves across a site or corridor to balance cut and fill.

  • Over-excavation: removing unsuitable soil below a design surface and replacing it.

  • Takeoff: the measured list of quantities taken from drawings.

  • Stockpile volume: the measured volume of material held on site in a pile.

  • Machine-control model: a 3D surface file that guides grading equipment to design.

  • Seat or user license: one paid login, billed annually or monthly, depending on the vendor.

  • Quote-based: a price given only after a sales conversation.

Frequently asked questions

Which tools here handle cut-and-fill?

Gradework by AGTEK and Trimble Business Center are the two whose pages name cut-and-fill or mass-haul functions. The other tools did not name those functions on the pages I opened.

Does PlanSwift publish its prices?

Yes, PlanSwift's pricing page lists annual per-seat prices for its Essential and Core tiers, and it says larger license counts are quote-based.

Is there a free option?

STACK states a free version of its Takeoff & Estimate tier and a free trial for Build & Operate, while PlanSwift and On-Screen Takeoff state free trials.

Why do third-party price guides disagree with vendor pages?

Third-party listings are often older, estimated or written by a competing vendor, so the vendor's own pricing page is the baseline and a written quote is the final price.

Can I replace a takeoff tool with Zapier, Make or n8n?

You can connect exports to other tools with Zapier, Make or n8n, but you must design and maintain the error handling, access controls and review steps yourself.

What should I test in a trial?

Run one recent plan set you have already bid, compare the quantities with your own hand count, and check that the export format matches the system you use for estimates.

Bottom line

For dirt bids, start with Gradework by AGTEK or Trimble Business Center and get the quote in writing. For PDF takeoff across trades, run the trial on PlanSwift, Bluebeam Revu, STACK, Togal or On-Screen Takeoff using a plan set you have already bid. Whichever you choose, decide who reviews quantities before they reach a bid. To see how a configured review step could be set up, see how US Tech Automations configures this.

About the Author

Garrett Mullins
Garrett Mullins
Workflow Specialist

Helping businesses leverage automation for operational efficiency.