Skip to content
AI & Automation

Tebra vs eClinicalWorks: Which Fits Your Practice in 2027

Nov 19, 2026

Short answer: both are healthcare products, so start with practice type

Tebra and eClinicalWorks are both electronic health record (EHR) and billing products sold to healthcare providers. An EHR is the software that holds a clinic's patient charts, visit notes, orders and prescriptions, so the first question is whether your business delivers care or bills health insurers at all. If it does not, neither product is the category you are shopping in, and this comparison will not settle your choice.

For a clinical practice, the direct answer is this. Pick Tebra if you are an independent practice that wants add-on fees printed on its pricing page and telehealth included in a core plan. Pick eClinicalWorks if you run a larger or more complex group that will use its wider platform and can accept quote-only pricing and a steeper learning curve.

Context on demand: EHR adoption: nine in ten office-based physicians, 2024 according to HealthIT.gov (2024). TechTarget reported the same figure in a July 2, 2026 article, according to TechTarget (2026).

Tebra is not a brand you can research separately from its history. The company was formed when Kareo and PatientPop merged, the merger closed in November 2021, and the combined company took the Tebra name with Kareo's founder, Dan Rodrigues, as CEO, according to HIT Consultant (2021). The old name still appears in Tebra's integration documentation, so an older Kareo guide may describe the same product.

TL;DR: Tebra suits independent practices that want visible add-on prices and a narrower plan to start with. eClinicalWorks suits larger, more complex groups that have an internal owner for IT. Neither company shows a full plan price on the pages we opened, so compare written quotes for the same provider count before you decide.

Key Takeaways

  • Both products serve healthcare providers, so a non-clinical business should not buy either one for general back-office work.

  • Tebra lists three add-on fees on its pricing page, but its plan prices are quote-based.

  • The eClinicalWorks pricing page we opened shows no plan names or figures, so its cost needs a written quote.

  • On SelectHub's 2026 aggregate, Tebra scores 80 and eClinicalWorks 81 out of 100, while Tebra's users recommend it more often.

  • Pick by practice type and size first, then by whether you need a published add-on structure.

  • Any automation that moves claims or scheduling data depends on export or API access you must confirm before you buy.

Who this is for

Tebra suits an independent private practice that wants to start with a narrower plan, such as Billing Starter, rather than a full bundle, and that wants to see add-on costs on paper. eClinicalWorks suits a larger or multi-specialty group that has an internal owner for IT, budget for training time, and tolerance for a quote-based contract. SelectHub's summary draws the same split and places eClinicalWorks with larger or more complex practices.

Users seem to recommend Tebra more often: Users who recommend: Tebra 79%, eClinicalWorks 69% according to SelectHub (2026), across 1,549 Tebra reviews and 581 eClinicalWorks reviews on several sites.

Red flags: (1) your business does not deliver care or bill insurers; (2) you need a plan price in writing before any sales call; (3) you need offline mobile charting, which SelectHub's summary says eClinicalWorks lacks.

Decision checklist

  • Count the prescribing providers and facilities you have today, then ask both vendors to quote that exact count.

  • Ask which export or API method you would use for claims and scheduling data, and confirm who must enable it.

  • Confirm whether telehealth, e-prescribing and PDMP checks sit inside the plan or are priced as add-ons.

  • Ask eClinicalWorks to price the specific modules you need, since its pages we opened show no figures.

  • Confirm a business associate agreement is in place before any patient data moves through a third-party tool.

  • Test support response with a real billing question before you sign.

How we evaluated these two products

We weighted seven criteria by how strongly each one shapes a small practice's decision. The weights are our judgment, not a vendor or analyst score. Each figure in this article comes from a page opened for this review on November 15, 2026, or from the SelectHub comparison page, which was updated November 2, 2026.

CriterionWeightWhat we checked
Practice type and specialty fit20%Whether the vendor names your specialty and practice type
Price transparency20%Whether plan or add-on prices appear on the vendor's own pricing page
Practice size fit20%Vendor positioning for solo, small, or larger groups
Usability and user sentiment15%Aggregate user sentiment and recommend rates
Billing and payments scope10%Whether billing is included in the plan you would buy
Reported limitations10%Limitations users report on the aggregate page
Integration access5%Whether a documented API or export path exists

On the common scale SelectHub uses, SelectHub analyst score: Tebra 80, eClinicalWorks 81 out of 100 according to SelectHub (2026). The gap is one point, which does not decide the choice. Practice type and price transparency carry 40% of the weighting between them, and those are the criteria where the two products differ most in what they publish.

Feature matrix: what each vendor publishes

The matrix uses only what the vendor pages and the SelectHub summary state. "Not stated" means the page we opened did not say so, which is different from saying the feature is absent.

Feature or factTebraeClinicalWorks
Plan prices on vendor pricing pageQuote-basedNo figure on page opened
Published add-on feesEPCS setup about $75 per provider, one-time; PDMP $500 per facility, one-time, plus about $50 per user per yearNone on page opened
Plans named on pricing page5: Practice Automation, EHR+, Patient Experience + Marketing, EHR Starter, Billing StarterNone named on page opened
Practice type namedIndependent private practicesDental, vision, behavioral health, ASCs, urgent care, health centers, inpatient
TelehealthIncluded in EHR+ and Practice AutomationNot stated on pages opened
Patient engagementPatient Experience + Marketing plan; online scheduling and remindersPatient Engagement product named; features not listed
Billing and revenue cycleBilling and Payments; Billing Starter planRevenue cycle management product named; no figure given
AI featuresAI Note Assist and AI review repliesSunoh.ai named as a product; capabilities not described
SelectHub analyst score80 out of 10081 out of 100
Documented APISOAP web service; customer key plus loginNot checked for this article

Tebra describes itself as an EHR and practice management company for independent private practices and says it is trusted by 150,000 providers. eClinicalWorks says it is privately held, was founded in 1999, and has more than 180,000 physicians and nurse practitioners using its products, according to eClinicalWorks. Some third-party profiles give other founding years, so we rely on the company's own statement. The eClinicalWorks pricing page we opened names no plans or figures and offers demo and contact links instead. Its only pricing statement is that revenue cycle services are offered "at a lower price than your current provider."

What it costs to find out

Pricing checked November 15, 2026. EPCS setup: about $75 per provider, one-time according to Tebra (2026). The same page lists PDMP integration at $500 per facility, one-time, plus a PDMP user fee of about $50 per user per year, which it says is passed through from Appriss Health. Tebra's plan prices are quote-based and depend on provider count, features and implementation needs. Each subscription covers one prescribing provider, and non-clinical staff get access at no extra cost, which matters for a clinic with many front-desk users.

eClinicalWorks publishes no comparable figures on the pricing page we opened, so its cost stays quote-based until a written proposal arrives. A review site reports a per-provider starting figure for eClinicalWorks, but we did not find that figure on the vendor's own page, so this article does not repeat it.

The table applies the Tebra add-on prices above to a three-prescriber, one-facility clinic. It excludes the quote-based plan subscription.

Line itemPublished unit priceQuantityFirst-year cost
EPCS setup$75 per provider, one-time3$225
PDMP integration$500 per facility, one-time1$500
PDMP user feeAbout $50 per user per year3$150
Add-on total——$875
Plan subscriptionQuote-based—Not calculated

Worked example: a three-prescriber clinic with one facility wants electronic prescribing of controlled substances and a PDMP check for every prescriber. Using the add-on prices above, EPCS setup comes to 3 × $75 = $225, PDMP integration is $500 for the facility, and the PDMP user fee is 3 × about $50 = about $150 per year, so the first-year add-on total is about $875 before any plan subscription. The clinic's integration work would also reach Tebra's SOAP service at webservice.kareo.com, which Tebra's Help Center says requires a customer key that a System Administrator generates, plus a username and password on every request. That access step adds setup time before any workflow can run.

The add-ons are only part of the total. The subscription is the larger line, and it is the one neither vendor prints, so ask both for a quote on the same provider count and the same modules.

Tebra: best fit, limits, and rollout

Tebra fits an independent practice that wants EHR, billing, patient messaging and telehealth from one vendor and can start on a narrower plan. Its pricing page lists telehealth in both EHR+ and Practice Automation, and it lists Billing Starter for a practice that needs billing without the full clinical suite.

SelectHub's aggregate reports system crashes and slow load times, users who describe hidden fees after signing, limited customization for mental health and other specialty practices, and billing and insurance enrollment setup that can take longer than expected. Those are the disqualifiers to test during a trial call, especially if your specialty has unusual documentation needs.

Plan for a real setup period. Billing and insurance enrollment is the step the aggregate flags as slow, so start payer enrollment early. If you need an integration, Tebra's API help page describes a SOAP-based web service, and a System Administrator must generate the customer key. The integration user guide shows an update date of July 17, 2025.

eClinicalWorks: best fit, limits, and rollout

eClinicalWorks fits a larger or multi-specialty group that has an internal IT or operations owner and wants documentation automation and revenue cycle tools alongside its EHR. Its pages name dental, vision, behavioral health, ambulatory surgery, urgent care, health centers and inpatient care among its areas, which gives it a broader scope than a single-specialty tool.

The aggregate reports no offline mobile access, inconsistent support response times for critical issues, no team messaging inside a shared patient thread, limited customization for specialized workflows, and a steeper learning curve. For a small practice, the offline and support points are the ones to test first.

Budget for training. SelectHub's summary says the product needs dedicated training. We did not open an eClinicalWorks API page for this review, so confirm integration access and support tiers in writing before you sign. Primary evidence for the points above is the eClinicalWorks about page.

Where a DIY stack or a general tool fits

The realistic alternative for many small operations is a stitched workflow in Zapier, Make, or n8n, or an in-house script. Those tools can run on a schedule or a webhook, keep run histories, retry failed steps, and branch to an error path when they are configured that way. The buyer still designs and owns idempotency, so a rerun does not send the same reminder twice, along with escalation paths, access controls for patient data, and maintenance when the EHR's export or API changes. That ownership is the real cost of the DIY route.

A proposed US Tech Automations design for denied-claim follow-up would be configured for your system, not delivered as a finished product. The trigger is a claim status export or API pull from the practice management system. The action creates one follow-up task per denied claim, carrying the claim number, payer, denial code and due date. The output is a queue for billing staff plus a per-run log. Prerequisites are an export or API method that a System Administrator enables, a business associate agreement in place before any patient data moves, and a named billing owner. Human review points are a billing lead who approves any patient-facing message, and a rule that nothing writes back to the chart without a person signing off.

For missed-appointment recovery, the proposed trigger is a cancellation record in the scheduling export. US Tech Automations would configure the matching step as a lookup against the provider schedule, and the action builds a call list for front-desk staff that matches the open slot's provider and visit type. The output is that list plus a log of who called and when. No automated text goes out until the practice has approved its message templates, and a staff member confirms each slot before anyone is booked.

When not to use US Tech Automations: skip a custom workflow layer if you are a solo practice whose only need is a clean EHR with billing, because a plan that already covers reminders and billing follow-up is simpler. Skip it if your practice management system offers no export or API, since the workflow would depend on manual file drops. Skip it too if no one can own the exception queue every week.

Questions buyers ask before they sign

Is Tebra the same company as Kareo?

Yes, in the sense that Tebra was formed by the merger of Kareo and PatientPop and carries the Tebra name, as the opening section explains. Some Kareo naming still appears in its integration materials.

Does eClinicalWorks publish its prices?

No plan prices appear on the eClinicalWorks pricing page we opened, so treat its cost as quote-based until a written quote arrives.

Which one costs less?

The published figures cannot settle it, because Tebra publishes add-on fees but quotes its plans, and eClinicalWorks shows no figures on the page we opened. Ask both for a quote on the same provider count and modules.

Can a non-medical business use either product?

No, both are built for healthcare providers, so a retail, trade, or professional-services business should start with general tools instead.

Are the user ratings reliable enough to decide?

They are directional only. The review counts are split across several sites, and the aggregate is not a vendor audit, so use them to shape questions for a demo rather than as a verdict.

Does Tebra include telehealth, and does eClinicalWorks?

Tebra's pricing page lists telehealth in the EHR+ and Practice Automation plans. The eClinicalWorks pages we opened do not state telehealth terms, so ask for them in writing.

Bottom line

Pick Tebra if you are an independent practice that wants visible add-on fees and a narrower starting plan. Pick eClinicalWorks if a larger, more complex group needs its wider platform and can plan for quote-based pricing and dedicated training. Before either purchase, see how US Tech Automations configures this for the export, review and logging steps you would need to confirm.

About the Author

Garrett Mullins
Garrett Mullins
Workflow Specialist

Helping businesses leverage automation for operational efficiency.